14
TEMP. (Temperature and Humidity dial)
a. COOLING / HEATING mode:
• Rotate the dial < > in clockwise direction, the value increase 1°C/1°F per
scale. The maximum value is 30°C/86°F (25°C/77°F).
• Rotate the dial < > in counter-clockwise direction, the value decrease
1°C/1°Fper scale. The minimum value is 17°C/63°F(15°C/59°F).
• While rotating the dial < >, the display <
> keeps flashing. After the
adjustment, the display <
> shows the setting temperature.
b. DEHUMIDIFYING mode:
• In DEHUMIDIFYING mode, the dial < > is inactive.
c. TIMER:
• Rotate the dial < > in clockwise direction, the value +1 hour per scale.
• Rotate the dial < > in counter-clockwise direction, the value -1 hour per
scale.
• Press the key <
> before rotating the dial < >. The display <
> flashes
the on/ off time while setting, and shows the setting time on screen.
SPEED (Fan speed dial)
a. Rotate the dial < > in clockwise direction, the speed changes from Low
<F1>
→
Mid. <F2>
→
High <F3>
→
Auto<AU)>.
b. Rotate the dial < > in counter-clockwise direction, the speed changes
backwards from Auto <AU)>
→
High <F3>
→
Mid. <F2>
→
Low <F1>.
c. In COOLING mode, fan speeds are available from Low, Mid., and High to
Auto, while the display <
> shows <F1>, <F2>, <F3> and <AU> on screen.
d. Default fan speed is in medium speed <F2>.
TIMER (Auto-On/ Auto-Off setting key)
a. Press the key <
> to activate the timer, the indicator <
> lights on; press
the key <
> again to cancel the timer setting, ths indicator <
> lights off.
b. While the unit is operating, press the key <
> and rotate the dial < > to set
the Auto-Off time from 0 to 24 hours.
c. While the unit is on standby, press the key <
> and rotate the dial < > to
set the Auto-On time from 0 to 24 hours.
d. While setting the TIMER, rotate the dial < > in clockwise/counter-clockwise
direction, the value +1/-1 hour per scale.
e. During the TIMER mode, press and hold the key <
> for 1 second, the time
increases continuously.
15429_Dimplex DPRC40U Manual.indd 14
15429_Dimplex DPRC40U Manual.indd 14
9/09/20 6:40 PM
9/09/20 6:40 PM