7
Quick Reference guide
Site Selection and Preparation
This section provides easy step
by step instructions for selecting a
location and preparing the site to
install the fireplace into
:
Existing Fireplace
•
New wall construction
•
Dimplex mantel surround
•
kit or custom made mantel
surround
!
NOTE:
The fireplace insert
comes completely assembled
and wired. some tools may
be required to prepare the site
and assembly/install the trim.
The dimensions of the
fireplace insert are 26 inches
(66 cm) wide X 22 ½ inches
(57.2 cm) high X 12 inches
(30.5 cm) deep (Figure 1). You
should allow ¼ inch (0.6 cm)
around the fireplace insert for
ease of installation.
This fireplace does not require
any venting
.
CAUTION:
Clearance for
air circulation
beneath the
Figure 1
Before using the fireplace
1.
verify:
Are the circuit breakers for the
•
unit on?
Are the light bulbs loose? (To
•
check, follow the instructions
for replacing the light bulbs
under the maintenance section
of this manual.)
If you have any technical
2.
questions or concerns
regarding the operation of your
electric fireplace, or require
service contact customer
service.
The heater may emit a slight,
3.
harmless odor when first used.
This odor is a normal condition
caused by the initial heating of
internal heater parts.
