PREPARATION AND OPERATION
1. To obtain the optimum performance from your Dimplex DEVA-20 Evaporative
Cooler, we recommend the following procedure be followed, as different areas
within Australia have differing water types.
2. With the first use add a teaspoon of dishwashing liquid or Fabric softener to the
water. This will ensure the DEVA-20 curtain absorbs the water for maximum
cooling effect. You may find it necessary from time to time to add the liquid if
the curtain is not adequately wet.
3. Remove the unit from its packaging.
4. If you wish for the evaporative function to work, open the water inlet at the side
of the unit. Only fill with cold clean water into the WATER ONLY compartment.
Do not overfill with water (check the water level at front).
5. For extra cooling put ice into the machine through the water inlet.
6. Always use clean water (not tap water) and do not allow the same water to stay
in the machine for extended periods of time. It is recommended tht any water
left in the machine for 3 or more days should be drained away via the drain plug
provided.
7. Make sure the drain plug is tight before filling. When draining out water please
ensure the drain plug is refitted correctly and tightly.
5
