background image

CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE 

INJURY AND/OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY

Please read the operating instructions carefully before using your air circulator for the 

first time and keep them in a safe place.

WARNING

 – This appliance must not be used in a bathroom.

WARNING

 – Do not use this appliance in the immediate surroundings of a bath, a 

shower or a swimming pool.

WARNING

 – In order to avoid overheating, do not cover this heater.

WARNING

 – Do not use this heater in small rooms when they are occupied by persons 

not capable of leaving the room on their own, unless constant supervision is provided.

WARNING

 – To reduce the risk of fire, keep textiles, curtains, or any other flammable 

material a minimum distance of 1 metre from the air outlet.

WARNING

 - In order to avoid a hazard due to inadvertent resetting of the thermal cut-

out, this appliance must not be supplied through an external switching device, such as 

a timer, or connected to a circuit that is regularly switched on and off by the utility.

WARNING

 – Some parts of this unit can become very hot and cause burns. Particular 

attention has to be given where children and vulnerable people are present.

•  If the supply cord is damaged it must only be replaced by the manufacturers service 

agent or a similarly qualified person in order to avoid a hazard. 

•  This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concerning use of the appliance by 

a person responsible for their safety.

•  Children should be supervised to ensure they do not play with the appliance. 

•  Prior to cleaning or other maintenance, the appliance must be disconnected from 

the supply mains.

•  Never immerse the appliance in water or other liquids.

•  Do not place on soft, unstable or non-horizontal/angled surfaces.

•  Never operate the appliance if a cable or connector has been damaged, after 

appliance malfunction or if the appliance was dropped or is otherwise damaged.

•  If the mains lead is damaged it must only be replaced by the manufacturers service 

agent or a similarly qualified person in order to avoid a hazard.

IMPORTANT

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND 

RETAINED FOR FUTURE REFERENCE. 

Note also the information presented on the appliance

2

Содержание DCTF3HCP

















Отзывы: