Operation
1.
Remove the unit from its packaging
2. To begin using the
HUMIDFY
function, ensure the water tank is filled with water
by checking the water level window indicator.
3.
For extra cooling power, place the ice pack (supplied) into the unit as described
on page 10..
4. Plug into a power supply and press the
ON/OFF
button to start the appliance.
5. The unit will operate initially on a continual basis. If a set period of operation is
required, please follow the
TIMER
instructions on page 8.
6. Select the desired fan
FAN SPEED
by pressing the
FAN SPEED
button. Refer to
page 8 for different settings.
7.
Select the operation
MODE
as required, by pressing the
MODE
button. Refer to
page 8 for different settings.
8. Press the
LEFT / RIGHT
swing function as required.
9.
To switch the unit off at any time, press the
OFF
button.
Precautions
•
Do not overfill the water tank (check the MAX fill line).
•
Use only cold, clean filtered water.
• The unit is equipped with a number of safety devices, including a water shortage
protection & filter removal protection.
• Do not allow the same water to sit in the machine for a prolonged period.
• It is recommended that any water left in the machine for 3 days or more be re-
moved and replaced with clean water.
• The control panel must not come in contact with water or any other liquids.
Using the Remote Control
1.
Open the battery cover of the remote control, and insert a 2 x AAA batteries.
2. Please point to the receiver when using the remote control.
3. If the battery voltage is low, please open the battery cover as per the diagram
and replace with new batteries (2 x AAA). Then replace the battery cover.
Add water
11
