Dimplex DCAC20T, Инструкция по эксплуатации

Страница: 11 / 16

Operation
WIND MODE
By default, when the wind mode button is first pressed, the device will automatically
be on normal wind mode. Press the button again to switch modes. This will switch
the device wind modes in the following sequence: Normal - Natural - Sleep - Normal
etc. The corresponding indicator shows the function. The normal wind speed mode
has no indicator. When you switch the wind mode to natural, the LED display will
show a leaf. In natural wind mode, the 32 speeds are divided into three groups. 1-10
is low level natural wind speed, 11-20 is medium level and 21-32 is high level. The
display shows 10 levels under low level, 20 under medium and all 32 under high level.
In natural mode, the encoder switch can only select level 10, level 20 or level 32 wind
speed. When you switch the device to sleep mode, the LED display shows a moon.
In sleep mode, the encoder switch can only select level 10, level 20 or level 32.
VERTICAL SWING
Press the Up/Down Swing button to set off the vertical swing functionality. This
device will oscillate up to 80° vertically. When this function is switched on, the LED
display will show the vertical arrow symbol.
HORIZONTAL SWING
Press the Left/Right swing button to set of the horizontal swing functionality. This
device can oscillate up to 360° horizontally. You can select how much swing you
desire by pressing the button multiple times. You can choose between 30°, 90°, 180°
or the full 360°. 30° is the default setting. The LED display will show the desired
angle setting, as well as the side to side arrow icon.
SCREEN OFF
Press the Screen Off button to turn the display off whilst in operation. This will
ensure all indicator lights are switched off.
OTHER
Power Memory Function: By pressing the On/Off button in standby state, your
device will remember the state it was operating in before it was shut off, and
automatically return to these settings. Please note however, the timer function will
always need to be reset.
Display Brightness: After the device has been working for 1 minute, continuously,
the brightness of the display will be reduced to 1/3 of the normal brightness level to
reduce glare at night.
11