2
DFB4047
OPERATION
The fireplace is supplied with an integrated on/off remote control.
Note: Ensure that the fireplace 3 position switch is set to
the remote control setting.
To operate, push the ON button to turn fireplace on, push the
OFF button to turn the fireplace off.
BATTERY REPLACEMENT
To replace the battery, slide battery cover open on the hand
held transmitter.
Correctly install one 12 volt (A23) battery in the battery holder.
Close the batter cover.
Resetting the temperature cutoff switch
The heater is protected with a safety device to prevent overheating. Should the heater
overheat, an automatic cut out will turn the heater off and it will not come back on without
being reset. It can be reset by switching the ON/OFF SWITCH to OFF and waiting 5
minutes before switching the unit back on.
Caution
If you need to continuously reset the heater, unplug the unit and call your local dealer.
ON
OFF
BATTERY
COVER
