Filter Removal / Replacement
changes to L
speed.
Press any button to exit sleep mode.
Note: If you unplug the air purifier during sleep mode it will come out of Sleep
setting.
4. “TIMER” BUTTON:
Press this button one or more times, the numerical display indicates the operation
time you set (from 1 to 12 hours).
5. “UV-C” BUTTON:
Press this button to turn on or turn off UV-C lamp.
6. “IONISER” BUTTON:
Press this button to turn on or turn off Ioniser function.
7. PM 2.5 indicator and LED display:
This measures PM (Particle Matter) that are 2.5 microns in size. These particles
are microscopic and are the most dangerous to human health as they can enter
the lungs and blood stream. The LED indicator changes colour according to how
dirty/ polluted the air is:
Red: Heavily Polluted >150μg/m³
Orange: Lightly Polluted >100 - 149μg/m³
Yellow: Moderate >50 - 99.9μg/m³
Blue: Good >0 - 49μg/m³
Important note:
When the unit is not in use, please switch it off and unplug it.
FILTER REPLACEMENT INDICATOR
A continuous red FILTER RESET light indicates that it is time to replace the filter. Replace the filter
according to the directions below then press and hold the POWER button for 5 seconds to restart
the program system. The FILTER RESET light will turn off.
*The 3 in 1 filter will last approximately 6 months depending on how dirty the air is.
ION
Find the knob in the bottom
Turn the knob to left, lift the upper shell
Filter
Change the filter
Put back the upper shell
Turn the knob to right
Turn right
Turn left
UV- C
