Installation Set up
Open steel curtain (remove
1.
glass doors if applicable).
Remove two screws on log
2.
grate and remove log grate.
(FIGURE 1)
Pull front edge of plastic ember
3.
bed grate up and forward until
rear tab releases from the
ledge located at the bottom of
the mirror. (FIGURE 2)
!
NOTE:
Log set fits tightly
into firebox, some force may be
necessary to remove.
Locate and remove the two
4.
screws on the removable
bracket. Remove the bracket.
(FIGURE 3)
Locate and depress the
5.
mounting tabs on the plug
connector to remove the
‘dummy plug’.
(FIGURE 3)
!
NOTE:
Keep the ‘dummy plug
in a safe place. You will need it if
you decide to uninstall the remote
control to operate the fireplace
manually.
FIGuRE 1
Manual Controls
FIGuRE 2
FIGuRE 3
Depress
Mounting
Tabs
Bracket and “Dummy Plug”
Screws
Back
Ledge
Log
Emberbed
Rear
Tab
Front
Edge
Side Section
5
www.dimplex.com
Remote Kit Installation
Removable
Bracket
