Preparation for use
WARNING: THIS APPLIANCE MUST BE EARTHED
This heater must be used on an AC ~ supply only and the
voltage marked on the heater must correspond to the supply
voltage.
Important Safety Advice:
When using electrical appliances, Basic precautions should
always be followed to reduce the risk of fire, electrical shock,
and injury to persons, including the following:
•
If the appliance is damaged, check with the supplier before
installation and operation.
•
Do not use outdoors.
•
Do not use in the immediate surroundings of a bath, shower or
swimming pool.
•
Do not locate the heater immediately below a fixed socket
outlet or connection box.
•
Do not cover the heater. Do not place material or garments on
the heater, or obstruct the air circulation around the heater, for
instance by curtains of furniture, as this could cause
overheating and a fire risk.
•
The appliance is not intended for use by young children or
infirm persons without supervision.
•
Young children or infirm persons should be supervised to
ensure that they do not play with the appliance.
•
Do not use this heater in series with a thermal control, a
program controller, a timer or any other device that switches
on the heat automatically, since a fire risk exists when the
heater is accidentally covered or displaced.
•
Ensure that furniture, curtains or other combustible material
are positioned no closer than 1 metre from the heater.
•
In the event of a fault unplug the heater.
•
Unplug the heater when not required for long periods.
•
Although this heater complies with safety standards, we do not
recommend its use on deep pile carpets or on long hair type of
rugs.
•
The appliance must be positioned so that the plug is
accessible.
•
If the supply cord is damaged it must be replaced by the
manufacturer or service agent or a similarly qualified person in
order to avoid a hazard.
