Installation and
Operating Instructions
Focal Point Fire with Optiflame® Elite
incorporating 2kW Fan Heater
AUS/NZ
Model: Auvergne Log Model 2920.
Issue 2. 5/01/04 08/18720/0
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
Introduction
This fire incorporates a flame effect which can be used without
heating, so that the comforting effect may be enjoyed at any
time of the year. The flame effect is provided by low wattage
motor and two 40
watt lamps. Using the flame effect on its
own, therefore, requires little electricity.
The controls are concealed behind the ash pan flap beneath
the firebox. A choice of 1 kW or 2kW thermostatically
controlled heat output is provided by the fan heater, which is
concealed beneath the unit.
This model is designed to be free standing and is normally
positioned against a wall.
Installation Instructions
Ensure that all packing items are removed (read any warning
labels carefully).
Retain all packing until installation is complete
.
Firebox
Door
Glass
viewing
screen
Controls
behind
here
Heat
outlet
Fig.2
Fig.1
