Dimension One Spas HYDRO SPORT, Инструкция по установке и эксплуатации

Страница: 33 / 66

HydroSport

Connecting the HydroSport

Body Belt
The adjustable HydroSport

Body Belt is another
exercise tool available for your convenience in
creating a “tailored” exercise program.
Simply snap a HydroSport

Tensor Cord into one
of the two D-Rings on the belt and connect the
other end of the Tensor Cord to a Butterfly Top that has been installed into an OptiMount

. Then wrap
the belt around your waist, snap the buckle into place, and adjust the belt to fit you comfortably. Do not
make it too tight, as it could interfere with your ability for an emergency “quick-release”, or impact on
your exercise routine. You may now commence your “aqua-jogging” or “aqua-aerobics” exercise routine.
Do not make the HydroSport

belt too tight, as it could interfere with your ability to
remove the belt in case of an emergency, or adversely impact on your exercise routine.
Never exercise alone. Always have someone close by in case of fatigue, accident or
injury. When you are exercising, or simply relaxing, in “water” the risks of injury while
being alone are increased. If you become incapacitated for any reason, and do not have
someone available to help, you could drown.
Do NOT change your approved exercise routine without first consulting with your
physician. Your physician should approve any exercise program you use. Likewise, any
modifications to the program should also be approved before you implement the
changes.
Always wear shatterproof safety glasses whenever using HydroSport

equipment or
other stretch-band type of equipment. Failure to use proper eyewear may result in
serious injury or loss of sight.
Do not allow your Tensor Cords to remain in direct sunlight for extended periods of
time. Exposure to direct sunlight for extended periods of time can cause the Tensor
Cords to deteriorate. Deteriorated, or damaged, Tensor Cords could break and cause
injury if the break should occur during use.
Be sure to examine your Tensor Cords for damage or deterioration prior to each use.
Do not use damaged or deteriorated Tensor Cords.
You may connect additional Tensor Cord(s)s to the Belt to increase resistance.
29