DIMAX GROUP Konner & Sohnen KS 100PS, Руководство пользователя

Страница: 5 / 12

PROTECTION MODE: PROTECTION MODE:
Short-circuit/Overpower Protection: If the DC output is short-circuited, the unit will shut down to protect
itself. Please solve the problem and restart.
If the DC output is overpowered (Load(s) power > 150W) the unit will shut down to protect itself too. Please
unplug your device from the unit in time.
PROTECTION MODE: PROTECTION MODE:
Short-circuit / Overpower Protection: If the AC output is short-circuited or over-
powered (Load (s) power (for model KS 100PS >150W, for model KS 200PS
< 320W), the unit will shut down AC output to protect itself. Please clear the
problem and re-press the AC output button to switch on AC output again.
3. HOW TO PROVIDE POWER FOR USB DIGITAL APPLIANCES WITH THIS PRODUCT? 3. HOW TO PROVIDE POWER FOR USB DIGITAL APPLIANCES WITH THIS PRODUCT?
Connect the standard USB cable of digital appliance to the USB output of the unit, press “ ” to turn on USB
output. Press and hold the button for 3s to switch off.
The 12V DC output voltage is ranged between 9V~12.5V,
and the maximum output current is 15A.
NOTE
Limited Appliance Wattage (for model KS 100PS <
150W, for model KS 200PS < 200W), Lamp, Electric
Fan, TV. etc. AC will shut down when it’s short circuit -
ed or when the power is overloaded. Remove the
device and the unit will recover from short-circuit or
overpower protection in a few seconds. Repress the
AC output button to switch on AC output again.
When the AC port is not in use, turn it off to save
power.
DC output voltage drops while battery capacity drops due to chemical characteristics of the
battery. If your appliance does not have built-in input voltage stabilizing function, it may
shut down when input voltage is too low. Please unplug your device from the unit in time,
and recharge the portable power station immediately.
Some devices, such as refrigerator, ice maker or a laser printer may require a surge power to start or work Some devices, such as refrigerator, ice maker or a laser printer may require a surge power to start or work
during a certain period, the surge power could exceed (for model KS 100PS - 150W, for model KS 200PS- during a certain period, the surge power could exceed (for model KS 100PS - 150W, for model KS 200PS-
320W) or even higher,this could cause overpower protection with this unit. Please remove the devices 320W) or even higher,this could cause overpower protection with this unit. Please remove the devices
and consult the device manufacturers for more information. Please clear the problem and re-press the and consult the device manufacturers for more information. Please clear the problem and re-press the
“AC” button for AC output. “AC” button for AC output.
2. HOW TO PROVIDE POWER FOR AC APPLIANCES WITH THIS PRODUCT? 2. HOW TO PROVIDE POWER FOR AC APPLIANCES WITH THIS PRODUCT?
Connect the power cable plug of the electrical appliance to the AC outlet of the
product, press and hold “AC” for 3s to switch on the power and the unit will
start providing power to your appliances. Press and hold the button for 3s to
switch off.
QUICK CHARGE OUTPUT: QUICK CHARGE OUTPUT:
Qualcomm Quick Charge 3.0 Technology: Qualcomm Quick Charge 3.0 Technology: This product supports Qualcomm quick charge 3.0 output,
supports 5V~9V/2A max output for smart devices that supports Qualcomm quick charge 3.0. The actual
output voltage and current depends on the actual smart devices (for model KS 100PS see fig. 1 in Annex).
PD TYPE-C (FOR MODEL KS 100PS): PD TYPE-C (FOR MODEL KS 100PS):
PD Type-c port input 5V/2.4A 9V/3A 12V/3A 15V/3A 20V/3A, for smart devices such as mobile phones or
tablets that also support the PD fast charge protocol for fast charging endurance, When in use, you must
press the “Power On Key” screen to light up for normal output charging (Fig 1 in Annex).
When using the Type-c port, you must press” Power On Key” to Normal charging when the screen is on.
konner-sohnen.com
| 4