Dimastech EasyXL, Инструкция по сборке

Страница: 8 / 11

ASSEMBLY DimasTech EasyXL V.1.0 – STEP-9
- Align the slots at the base of
the BT062-2013 component (7)
with the slots at the back of the
DimasTech EasyXL V.1.0 and
fasten with No.2 screws
VC047_M4x10 (22) plus No.2
knurled nuts VC024_M4 (19), as
shown in the figure beside.
ASSEMBLY DimasTech EasyXL V.1.0 – STEP-10
- Align the M3_ inserts of the
component BT153 (8) with the
holes in the back part of the
DimasTech EasyXL V.1.0 and
fasten with No.2 screws
VC049_M3x6 (21), as shown in
the figure beside.
Note: The number indicated in the brackets indicates the corresponding
identification in the table on the page No.2