Dimastech EasyXL, Инструкция по сборке

Страница: 4 / 11

ASSEMBLY DimasTech EasyXL V.1.0 – STEP-1
- Assemble No.4 VC067_rubber-
feet_M4 (11) into the dedicated
M4 threaded inserts, located at
the base of the
DIMAS_200_C_RF-RB_V.1.0 (1)
body, as shown in the figure
beside
ASSEMBLY DimasTech EasyXL V.1.0 – STEP-2
- Unscrew the No.4 screws
VC048_M3x10 housed in the
front part of the DimasTech
EasyXL V.1.0 and extract the
two preassembled components
BT148 (3) and BT149 (4), as
shown in the figure beside.
Note: The number indicated in the brackets indicates the corresponding
identification in the table on the page No.2