Dimas Dimas WS 460, Руководство по эксплуатации

Страница: 18 / 19

Adjusting The Locking Handle
As the saw wears, the locking handle may need to be
adjusted if play is noticed between the saw head and
the saw carriage.
To adjust the locking handle; loosen the two top 6mm
socket head setscrews (one on each side of the handle
mount). Turn the eccentric bushings with the supplied
adjustment tool until the cam lies tight against the saw
head. Tighten the top 6mm socket head setscrew.
Adjust the other side. Remove saw head and tighten
the lower 6mm socket head setscrews on both sides.
Grease The Blade Spindle
In order for the blade spindle to be fitted as easily as
possible, it may be necessary to grease the hexagonal
blade spindle.
Note: Also check that the hexagonal shaft is not
damaged.
Top
Lower
17