Dillon Quick Balance, Инструкция пользователя

Страница: 8 / 26

8 Quick Balance User Instructions
2 Introduction
This manual covers the setup and operation of the Quick Balance Tension Meter from
Dillon. The Quick Balance is a simple, accurate strand dynamometer. It can be
clamped onto a cable, accurately determine the wire tension and be removed in
seconds.
The Quick Balance can handle multiple wire diameters, it can display live tension, dual
live/peak tension, average tension captured from several tests, dual tension/
temperature display and a check-tensioning graphical display.
With its battery-powered electronic interface, setup and operation is made simple with
on-screen prompts.
2.1 Unpacking
When you receive your Quick Balance, unpack it and inspect the container and the
instrument for any damage. Report any problems to the shipping company immediately
and save the packing materials.
Insert 2 ‘C’ batteries into the battery compartment, shown in Figure 2.1 . Your Quick
Balance probably comes from the factory with the proper sheave size installed and
calibrated for your application. If not, follow the setup directions in
Configuration Mode
on page 18 and Changing Sheaves on page 21 .
2.2 Description
The Quick Balance is shown in Figure 1 with the parts labeled.
Figure 2.1 Front Panel and Keys
Sheaves
Lever arm
Front panel
Battery
compartment
Support
arm