18
Quick Balance User Instructions
4 Configuration Mode
4.1 Accessing the Configuration Mode
You need to access the Configuration mode to perform certain tasks. Access to some
of these tasks may be restricted by a supervisor password.
To access Configuration mode:
1.
From normal operating mode, press the
Right Arrow
softkey…
A new softkey set, shown below, appears:
2.
Press the
Config
softkey…
The following is displayed:
3.
Use the
Num
and
Adv
keys to enter the Config password. Default is 0. After
the number is displayed, press the
Enter
key…
The following is displayed:
The
Num
keys increment and decrement the displayed numbers. The
Adv
key
moves the cursor to the next digit position.
Default Configuration password is 0. If a new password is lost or forgotten, contact
your Dillon distributor.
Содержание Quick Balance
Страница 1: ...Quick Balance Tension Meter User Instructions AWT 35 500545 Issue AB ...
Страница 4: ...4 Quick Balance User Instructions ...
Страница 25: ......
