11
When the low battery annunciator appears, you have approximately five hours
of usage left. To change the nine-volt battery in the ED-2000plus, follow these
steps:
1. Remove the two knurled thumb screws from the battery compartment
cover. (Be careful not to lose these screws.) See Figure 6.
Figure 6
Battery compartment cover
2. Remove the battery compartment cover.
3. Slide the battery down and pry the free end of the battery out of the
compartment opening. See Figure 7.
Figure 7
Battery removal
4. Pull the battery out of the compartment and disconnect the battery from
the battery lead.
5. Connect new battery to the lead and reverse the disassembly procedure.
ED-2000plus connected to
an HR-2000 by wire
receives power from the
HR-2000. A battery is not
recommended in the
ED-2000plus in this
situation.
Battery Replacement
The HR-2000 does not contain
a low battery detector. It merely
displays the low battery warning
from the loadcell. Because of
this, change batteries in both
the ED-2000plus and HR-2000
when the battery warning lights
up. (Radio-Link systems only)