20
lEad aCId HandlEBarS
Sealed lead acid Handlebar Functions
The left handlebar has two buttons, a red button and a green button. The red button
activates the bikes lights. the green button activate the horn. To turn the bike on simply
turn the key on the battery switch.
On the right handlebar there is a twist throttle and 3 LED’s.
Each LED indicates the level of charge the battery has.
GREEN (MAX) - Indicates when the battery is a maximum charge or at a high level of
charge.
YELLOW (MED) - Indicates when the battery is at a medium charge
RED (MIN) -
Indicates when the battery is approaching empty state. The battery should
be charged as soon as possible.
PlEaSE noTE
When riding the bike for the first time, pick an area away from cars and
pedstrians. This will allow you familiarise yourself with the controls of the
bike, this will ensure the safety of yourself and others around you.
1. Plug the charger into the wall socket/
outlet, just like a laptop of mobile phone
charger.
2. Check that one of the charger indicator
lights glows green.
3. Plug the charger, (battery end) into the
battery plug carefully, making sure it is all
the way in. Do not force it if there is an
obstruction.
4. The charger indicator lights should glow
red whilst charging.
5. Once one of the charger indicator lights
changes from green to red, the battery is
fully charged.
There is no way to over-charge the battery.
When it is full, the charger will stop
charging the battery automatically.
Charging time can vary from 1 to 8 hours if
fully empty.
The battery should be charged once every
month as a minimum to maintain healthy
cells.
The best way to charge your battery is
to plug it in after every use, and leave it
on charge until the indicator light shows
the battery is fully charged. It is not good
practice to partially charge the battery.
