![Dillenger Hunter BBS 2015 Скачать руководство пользователя страница 26](http://html.mh-extra.com/html/dillenger/hunter-bbs-2015/hunter-bbs-2015_user-manual_2502384026.webp)
26
LCD OPERATION
We have an LCD manual on the product page online, or follow this link:
Dillenger C955 manual (click here to download)
Please consider these important points for best use:
1. The keys for your bike are zip tied to your handlebars. You will have 2 keys so please
keep one as a spare separately.
2. The battery light indicator on the battery is not an indication of battery charge. The
only approximation of battery charge level is on the LCD display. The only accurate way
to know that the bike is 100% charged is by charging it until the charger light shows it is
fully charged (next page). Conversely, the only way to accurately know that the battery
is flat is to use the bike until the LCD cuts out and does not turn back on. You do not risk
damaging the electric system by running the bike flat. Just make sure you charge the bike
after every ride.
3. Make sure you routinely check the tightness of key fasteners (nuts and bolts) such as
the front wheel, rear wheel, seat, handlebars, forks, pedals, brakes, etc.
4. Make sure you keep the battery topped up as often as practical. Charge the bike after
every use, at least once a month if not being used and before each ride if you have not
charged it in a week. It is not necessary to run the battery down at all. Leaving the battery
flat runs the risk of completely depleting the cells which could cause premature battery
failure.
5. Make sure your tyres are pumped up to the correct PSI, which is indicated on the tyre
side wall.
6. The battery has an on/off switch located near the handle. You must turn the switch on
before powering up the bike, and turn it off after use. The LCD display turns the system
on, once the battery is turned on.
Содержание Hunter BBS 2015
Страница 8: ...8 3 handlebars attached by the wiring 4 Charger ...
Страница 12: ...12 Secure the through axle in place by tightening the 4 bolts that were loosened to remove the through axle ...
Страница 15: ...15 Stem and handlebars are now in position on the headtube ...
Страница 18: ...18 SEAT This is the easy part Simply insert your seat to the desired height about hip height as shown ...