Dillenger Hunter BBS 2015, Руководство пользователя

Страница: 10 / 33

10
FRONT WHEEL
Start by loosening the 4 bolts at the bottom of the fork in order to remove the through
axle. You will have to remove this axle to mount the front wheel and then the axle can be
inserted and fastened.
Prior to assembling the front wheel, we suggest removing the front brake caliper. It’s not
essential but it does make it a lot easier. Once you’ve removed the caliper from the front
fork, you can insert the wheel into the forks as shown below. It can be quite a tight fit, this
is intentional. You will have to maneuver wheel and forks where needed so you can line
up the through-axle with the center.
This stage shows the through axle almost in position:
Once in place, tighten the through axle with the specialized nut provided:
ASSEMBLY