EN
page 26
3. OPERATION
3.1
Machine start-up
3.1.1 Start-up
• Put the surface fi lters in place.
DO NOT use the appliance without the fi lters.
• Shut the dishwasher door.
• Turn the water valve “open”.
• Turn the main power switch ON.
• The machine is on
STAND-BY
.
In the
G
display, the message
STAND-BY
will appear.
• Turn the button
B
.
The machine start will be active when the
A
button will light.
On the
G
display the
STAND-BY
message will be off.
The button
A
will light in white for a few seconds, while loading the software. After
loading is complete, the button will light in red.
At this moment, the water fi lling starts. The display
G
will read
FILLING WATER
.
Check the proper positioning of the overfl ow pipe.
Should the machines be equipped with the WRAS certifi ed Break Tank, the tank
fi lling phase is extended.
Once the fi lling is done, the heating phase will start On the “G” display will appear the
reading
HEATING
. The reading will stay until both boiler and wash-tank will reach the
set temperatures. During this process, the machine will not allow any cycle selection or
start.
After the fi lling/heating is completed, the key
A
and the display
G
will turn green.
If the machine is in standard confi guration, with hot water in-feed (50°C), with no extra
power, the
A
button will light in green after some 20 min.
3.1.2 Operation
• Insert the rack fi lled with objects to wash (see par.
3.2
).
•
Select the desired wash program by the keys
C
and
D
or by keeping pressed
the
A
key.
Release the key when the selected program is selected.
To start the selected cycle press the
A
key.
The
A
key and the
G
display will turn blue.
•
All wash-time long the display will read the wash-tank temperature and the
boiler temperature.
Below the temperatures indications line-bar is displayed to show the
progression of the wash-cycle.
At the end of the washing cycle, a hot rinse cycle will take place
A blue/green fl ashing on the button
A
will indicate the
CYCLE ENDED
.
OFF
FILLING WATER
OFF
HEATING
OFF
57 C
85 C
CYCLE 1 (3 min)
CYCLE 2 (6 MIN)
CYCLE 3 (9 MIN)
CYCLE 4 (12 MIN)
CYCLE SELECTION
BOILER
TANK
ON
STAND BY
Содержание LP3 S Plus
