Digium, Inc.
Page 45
Chapter 3: Configuration
linux package. You can specify the echo canceller to be used for each
channel. The default behavior is for there to be no echo canceller on
any channel. So, it is very important that you specify one in the
system.conf file if you do not have hardware echo cancellers and need
echo cancellation. The format is:
echocanceller = <echocanceller name>,<channel(s)>
A list of valid echo cancellers are specified in the sample system.conf
file.
The following is a typical setup for a T1 PRI in the US using software-
based echo cancellation:
echocanceller = mg2,1-23
