Digium, Inc.
Page 30
Chapter 2: Card Installation
Hardware Installation
1.
Now that you are acquainted with the cards, power down your
computer and unplug it from its power source.
2.
Attach a static strap to your wrist and open the case.
3.
Remove the bracket place holder and insert the card into a PCI
Express slot. See Figure 8 for an example of card installation.
Figure 8: Insert the Card
4.
Replace the cover to your computer.
5.
Plug all T1 or E1 equipment cables into the RJ45 ports as needed.
Note:
Use only shielded cables to ensure compliance with the
international EMC standards.
