Chapter 3: Configuration
The following is a typical setup for a BRI span:
span => 1,0,0,ccs,ami
4.
Specify the channel definitions. The format is:
<device> = <channel list>
A list of valid devices are specified in the sample system.conf file.
The following is a typical setup for BRI:
bchan = 1,2
hardhdlc = 3
The bchan device specifies the bearer channels (B channels). The
hardhdlc device specifies the delta channel (D channel).
Note:
Unlike Digium’s Digital E1 cards, the device for the delta
channel must be specified as hardhdlc instead of dchan. The B410P
will not function properly if dchan is specified.
Digium, Inc.
Page 32
Содержание B410P
Страница 1: ...B410P User Manual 601 00001 Rev B3...
