![Digium AEX410 Скачать руководство пользователя страница 32](http://html1.mh-extra.com/html/digium/aex410/aex410_user-manual_2502183032.webp)
Digium, Inc.
Page 32
Chapter 2: Card Installation
installed any of these, Digium recommends that you upgrade to the latest
“-current” version of each.
Note: If you are using the 1.4.x series of Asterisk, you will need
Asterisk 1.4.22 or newer.
1.
After the machine has booted to Linux, log in and execute the follow-
ing command to list the devices detected by the PCI bus:
# lspci -n
Confirm that the output from
lspci
lists a device with Digium’s PCI
vendor ID which is “d161”. The screen output should be similar to the
following:
0000:01:00.0 0200:d161:<card identifier>
Note: The output from
lspci
may or may not state “Unknown
device”. If it does, this does not indicate a problem.
In the PCI device listing shown above, <card identifier> will be
populated with one of the identifiers listed in the table below.