22
SAFETY GUIDE
Please follow the directions below when installing, using and maintaining it in order to
guarantee the device to work well.
When installing and operating the device, please make sure proper power supply first,
and then do other operations after it is initialized.
As signal and power transfer need custom cable, please use matched cable,
unmatched cable may cause system work improperly or even damage the device.
Keep airy during operating to prevent high temperature.
Keep the device away from working long in wet environment to prevent short circuit.
Please do not open the device without permission of professionals.
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of
Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive 2011/65/EU for RoHS compliance.
The complete declaration of conformity can be requested by post under the below mentioned manufacturer
address.
Note:
If wrongly installed or improperly used in the living area, the device can cause interference in radios and other
electronic devices. Appropriate use is when the device, as far as feasible, is operated with shielded
connection cables (with network products in addition to category 5 shielded cables and higher). The device
has been tested and falls within the limits of class A computing equipment according to the requirements of
EN 55022.
Warning:
This device conforms with test category A - it can cause radio interference in the living area; in this case the
operator may demand that appropriate measures are implemented and arise for this reason. Declaration of
conformity: The device fulfills the EMV requirements according to EN 55022 for ITE and EN 55024 class A.
Devices with external or integrated power supply furthermore fulfill the requirements of EN 61000-3-2 and EN
61000-3-3. In this way, the fundamental protection requirements of the EMV-2014/30/EU guideline are
fulfilled.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
