8
Transmitter
Receiver back
view
Receiver front
view
1. HDMI Loop out
4. USB cable
2. HDMI In
5. HDMI Out
3. IR Emitter cable
6. IR Extender function
How to control the device by using remote control
1.
Connect the IR emitter cable with the Transmitter IR jack, and
stick the IR probe in front of the IR sender of the video source
(Please find the correct position of IR sensor of the video source
or the IR signal won't pass through)
2.
Use the source device remote control aiming at IR receiver hole
of the Receiver front panel to control the source device, the
distance between this IR receiver probe and remote control
should be within 5m
How to control the device by using mouse/keyboard
1.
Connect the PC Transmitter by using a Micro USB - USB Type A
cable
2.
Connect the Receiver USB jack with a mouse/keyboard
(USB nano receiver)
3.
Then you can use the mouse/keyboard to control the PC
in other room
