3
System Requirements
•
Windows® 10, Windows® 8, Windows® 8.1, Windows® Server 2012 R2,
Linux 32bit or 64 bit
•
One available PCI-Express x4/ x8/ x16
Hardware installation
Please first install the M.2 M Key SSD and M.2 B Key SSD into the NVMe
adapter; then follow these steps:
1.
Turn Off the power of your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
To install the card, carefully align the card’s bus connector with the selected
PCIe slot on the motherboard. Push the board down firmly.
4.
Used the SATA cable to connect NVMe adapter to the motherboard SATA
port
5.
Replace the slot bracket’s holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
