29
7.4. Auto-Scan in OSD: <F2>
7.4.1.
Start to auto-scan in OSD
Press
<F2>
in OSD main menu. The auto-scan banner will be shown to
indicate the scanning channel.
─┬──
┬
──┬──────
│
│
└─
Channel
Name
│
└──────────
Channel Number
└───────────────
Indicate now is Scan Mode
Figure 22: Auto-Scan Banner
Note: You can also start auto-scan function via hot key by using
<Scroll Lock>
→
<Scroll Lock>
→
<S>
→
<Enter>
outside the OSD
mode. Please refer section
6.6.1 Start Auto-Scan Function.
7.4.2. Stop
auto-scan
Press any key on keyboard to
STOP
the auto-scan function. The
auto-scan banner will be disappeared when the scan stopped.
7.4.3. Auto-scan
mode
There are two auto-scan modes, please refer section
7.3.1 Setup in
OSD – Scan Mode
to set up the auto-scan mode.
Scan all computers which are power on.
Scan all computers which are marked for auto-scan.
7.4.4.
Auto-scan time interval
The auto-scan time interval of each port displayed can be adjustable by
pressing
<F1>
in OSD main menu. Please refer section
7.3.2 Setup in
OSD – Scan Time.