1. Overview
The Media Converter complies with
IEEE802.3, IEEE802.3u, IEEE802.3x
Standards. It is designed to convert data
signal between 10/100 Base-TX and
100Base-FX fast Ethernet. It supports
10/100Base-TX and 100Base-FX
applications. The data signal converted by
such high performance media converter can
be transmitted up to 120Km maximum by
fiber-optical cable.
The Converter is equipped with two fiber optic
connectors (One for transmitting-TX and
another for receiving-RX) and two RJ-45
Jacks and one external power supply
receptacle. Six LED indicators are built-in for
easy diagnosing and monitoring the status of
power, Unshielded Twisted Paired (UTP) Link,
UTP Activity, Fiber Link, Fiber Activity, Full
duplex and data rates. It can be configured
automatically for Full Duplex or Half Duplex
operation.
It is compact, cost-effective, low
dissipative, high reliable and stable. It can be
used in standalone applications, or
Rack-Mounted applications where multiple
media converter can be inserted into a
rack-mount chassis (Up 10 units), and
allowing all the converters to be powered by a
single internal power supply.
2. Specifications:
2.1 Performance introduction (Table 1)
Parameter Type
Data rate (Mbps)
10/100
Optical wavelength
(nm)
850,1310, 1550(for
over 60Km long
distance)*
Fiber type(
μ
m)
Single mode 9/125*
Multi-mode 50/125*
Connector type
SC/PC
or ST/PC
or
FC/PC
Max distance (km)
20,40,60,100*
Power supply
2A,+5VDC±3%
Operating
temperature
0
～
50
℃
Storage temperature -40
～
80
℃
Relative humidity
5% to 90% non
condensing
Size
95mm
×
71mm
×
26mm
Table 1: performance introduction
*Note: Please refer to Specifications.
2.2 Appearance (Fig.2, Table2)
fig.2 Front Panel
LED Color
Function
FSD
Green
If the light is on,FX port is
good of physical connect.
10/100
Green
Light on means TX port
speed is 100Mbps ,light off
means TX port speed is
10M
L/A
CT
Gre
en
Light on means TX port is con
nected; Light blizing means it
is receiving data from TP
F/L
Gre
en
Light on means FX port is con
nected;Light blizing means it is
receiving data from TP
PO
W
Gre
en
Light on means the power is
connected
FDX
Gre
en
Light on means full duplex
working mode;
Light off
means
half duplex working mode
Table 2.LED performance
3. Power Adapter
AC Input: 85
～
265VAC 50/60Hz
Or DC Input: -48VDC
DC Output: 2A, +5VDC±3%
4. Check list
Before you start installing the Converter,
verify the package contains the following:
1) The 10/100Base-TX to 100Base-FX
Ethernet Media Converter------------
×
1
2) The
Power
Adapter
-------------------
×
1
3) This User’s Manual-------------------
×
1
Please notify your sales representative
immediately if any of the aforementioned
items is missing or damaged.
