10/100Base-TX Fast Ethernet
Media Converter
Manual
5.1.3 TP port list (Fig.4)
5.2 Installing
5.21 TP port installing
The parallel lines connect the RJ45 port
(have the “
”the marking connect)
The cross lines connect the RJ45 port
(have the “
” the marking connect)
5.22 Fiber port installing
Connect the fiber-optic transceiver on the
media converter with the Single-mode SC
fiber connectors.
5.23 Connect to switch power adaptor
5.24 Check the appearance that converter
instructions light
If connection right, the PWR, L/A LED is
bright; Otherwise checking the Fiber port and
TP port.
Note: Connecting to Router, Bridge or
Switch, please refer to the device’s
Technical Manual.
5. Installing the Converter
5.1
For as a standalone unit:
5.1.1
Verify if the AC-DC adapter conforms to
your country AC power requirement
then insert the power plug
5.1.2
Check the type of UTP (see fig.3)
UTP complies with IEEE802.3
Standards, and has two types: T568A
T568B.
G G O B B O P P O O G B B G P P
Fig.3 The type of UTP
NOTE: G:
Green
；
O:
Orange
；
B:
Blue
；
P:
Palm
Parallel cable:
connect T568A to T568A , or
T568B to T568B
Crossing-over cable:
connect T568A to
T568B
