Configure the Wi-Fi Repeater Mode
Configure the Wi-Fi Repeater Mode with WPS Button
This is the easiest way to configure the AP/Router. First, check whether your
wireless router supports WPS. For further details, please read the operating
instructions for your wireless router.
1.
The mode selector must be set to the "
Repeater
" position for Repeater
Mode.
2.
Plug the AP/Router into a wall socket.
3.
Press the WPS button on the AP/Router for at least
6
seconds.
The Wi-Fi/WPS LED now flashes for approx. 2 minutes.
4.
Within these 2 minutes, please Press the WPS button of your Wireless
AP/Router directly for
2 - 3
seconds. (For further details, please read the
operating instructions for your wireless router.)
The AP/Router then automatically connects to your wireless router and copies
wireless key of the settings.
The AP/Router can be accessed via the SSID and the wireless key of your wireless
router.
