Adding a Wireless computers to the AP/Router with WPS Button
This is the easiest way to establish a connection to the AP. First, check whether
your end device supports WPS. For further details, please read the operating
instructions for your end device.
1.
Log on to the computer.
2.
Press the WPS button on the AP/Router for
3
seconds. The WPS LED now
flashes for approx. 2 minutes.
3.
Within these 2 minutes, please press the connection button (WPS) on your
end device. (
For further details, please read the operating instructions for
your end device.
)
Your end device then automatically connects to your AP/Router and applies all of
the settings. You should see icons
for the computer you added and for the
other computers and devices that are part of the network.
Adding a wired (Ethernet) computer to the AP/Router
1.
Plug the AP/Router to a socket. Connect your computer / laptop with the
AP/Router with enclosed RJ45 Cable.
2.
To Confirm that you added the computer, do the following:
Open Network by clicking the
Start
button
, and then clicking
Control
Panel
. In the search box, type
network
, and then, under Network and
Sharing Center, click
View network computers and devices
. You should see
icons
for the computer you added and for the other computers and
devices that are part of the network.
For more information:
http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-to-a-network
http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network
http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network
