8
2. Camera
Cabling
Before users connect cables, make sure that all cables and the power adaptor
are placed in dry and well-waterproofed environments, e.g. waterproof boxes.
The purpose is to prevent moisture accumulation inside the camera and
moisture penetration into cables, which might lead to camera breakdown.
Please follow the instructions below to complete camera connection.
2.1
Connect Ethernet Cable
Refer to the camera type and follow the instructions to connect Ethernet cable.
2.1.1 Outdoor
Camera
The RJ-45 cable of the outdoor camera is an IP66 RJ-45 cable. Refer to the
instructions below to connect Ethernet cable and waterproof connector.
IP66 RJ-45 Cable
IP66 RJ-45 Cable
For IP66 RJ-45 cable, please use an RJ-45 IP66 plug for connection to prevent
water damage. Follow the steps below for cable connection.
Step 1:
Take out the supplied connector from the
RJ-45 IP66 plug. Loosen the thread-lock
sealing nut on the plug. Then thread the
Ethernet cable through the thread-lock
sealing nut and the plug. If the Ethernet cable
is already attached to a connector, please
remove it first.