5
1.4 Installation
Please follow the steps below to install the outdoor camera.
Step 1:
Loosen the two security screws of the
camera and detach the dome cover.
Step 2:
At the two sides of the base plate, place
a rubber washer on the screw hole
shown in the right figure.
Step 3:
Place the camera at the installation
location. Then attach the camera to the
ceiling by fastening the supplied screws
to the screw holes with the rubber
washers.
Step 4:
Refer to section
Connectors
and chapter
Camera Cabling
for camera lens
adjustment and cable connection.