Digitus DN-16065-1, Руководство пользователя, Страница: 23 / 37

20
When “Port Mapping” is set to “Enable”, the system will automatically assign an IP address or
port number for you if no IP address or port number is entered.
Note: When the configurations are saved successfully, you’ll see a message indicating the IP
address and port number assigned to your device.
4.4 Camera
4.4.1 System
Set the camera OSD display.
4.4.2 Preset
Note: Before using this function, make sure the DPTZ function is enabled.
You can set new preset points (up to 16) or check existing points here.
How to set a new preset point
Step1: Click DPTZ icon.
Step2: Click to where you want to see, and you’ll get a 5x zoom-in image. To slightly zoom out,
draw a square from the bottom right to top left, and you’ll get a 3x image. Draw the
square again and you’ll return to the original size.
Step3: In “Current Position”, give a name to this point, and click “Add”.
How to check an existing preset point
In “Available Positions”, select the name of the point you want to check from the drop-down list,
and click “Goto”.
You will see the camera view on the right side moving to the point it’s recorded.