Digitus DN-16065-1 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 37

Digitus DN-16065-1 Скачать руководство пользователя страница 10

7

3.3.3 Firmware Upgrade

This function is used when users need to upgrade the network camera for function scalability.

Note:

Before using this function, make sure you have the correct upgrade files provided by your installer or
distributor.

Step1: Click “

”, and select the IP address of your network camera in the address book.

Step2: Click “

” to show the upgrade page, “Update Server”.

Step3: Click “Add” to browse to the upgrade files.

Step3: Back up all your configurations if necessary.

Firmware upgrade might reset all configurations to default. To keep all your configurations, select “System
Backup” to back up all your configurations and a “system.bin” file will be generated.

Note:

To restore all your configurations after system upgrade, upgrade “system.bin”.

Step4: Click “Upgrade Firmware” to start firmware upgrade.

Note:

It takes a few minutes to finish the upgrade process. Do not disconnect the power during firmware upgrade, or
the upgrade may be failed. The camera will reboot after the upgrade.

Step5: Select the IP address of the camera and click “

” again to check if the firmware is upgraded.

3.3.4 E-Map

Video Viewer is also a Central Management System (CMS) software, which allows network device control &
management for up to 16 devices simultaneously.

Note:

Before using this function, make sure Video Viewer is connected to all the devices (up to 16) you want to
monitor.

«
...
8
9
10
11
12
...
»

Содержание DN-16065-1






































Отзывы:

Нет отзывов