Digitus DN 16058 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 31

Digitus DN 16058 Скачать руководство пользователя страница 9

6

3.3.3 Firmware Upgrade

This function is used when users need to upgrade the network camera for function scalability.

Note:

Before using this function, make sure you have the correct upgrade files provided by your installer or
distributor.

Step1: Click “

”, and select the IP address of your network camera in the address book.

Step2: Click “

” to show the upgrade page, “Update Server”.

Step3: Click “Add” to browse to the upgrade files.

Step4: Click “Upgrade Firmware” to start firmware upgrade.

Note:

It takes a few minutes to finish the upgrade process. Do not disconnect the power during firmware
upgrade, or the upgrade may be failed. The camera will reboot after the upgrade.

Step5: Select the IP address of the camera and click “

” again to check if the firmware is upgraded.

3.3.4 E-Map

Video Viewer is also a Central Management System (CMS) software, which allows network device control &
management for up to 16 devices simultaneously.

Note:

Before using this function, make sure Video Viewer is connected to all the devices (up to 16) you want
to monitor.

E-Map is

ONLY

available when the control panel is switch to the full function version.

How to Add an E-Map Group

STEP1: In the simplified version, click “

” to switch the control panel to the full function version, and click “

”

to enter the E-Map page as follows.

Note:

To know where the buttons are, please refer to “3.2.1 Simplified Version (Default)” at page 3, and
“3.2.2 Full Function Version” at page 4.

«
...
7
8
9
10
11
...
»

Содержание DN 16058
































Отзывы:

Нет отзывов