device or the MFP server.
⑤
.
Connect the DN-13005
1. Connect DN-13005 to the network, such as a LAN switch or a LAN hub,
using a LAN cable.
2. Connect DN-13005 to USB printers, hard drives or flash ROM disks, and HP
all-in-one series printers (AIO/MFP) using USB cables.
3. Connect DN-13005 to the power jack using the power adaptor (included in
this package).
⑥
.
Install Utility
1. Insert the included CD-ROM (DN-13005 USB MFP Server Product CD) into
the personal computer. The Autorun screen as Fig2 should appear.
2. Click
Install Product
button.
3. Click
Next
, if you see any Next button in installation windows.
4. Click
Finish
.
⑦
.
Configure DN-13005 with Utility
Using MFP Control Center Software (Fig3):
1.
Open the MFP Control Center. It will automatically search the existing
servers and display their status.
2.
Select the server that you want to configure. Double click the selected server
and enter Administrator (default:
admin
) and Password (default:
admin
).
3.
Name your DN-13005 server and select a codepage for file server function
as Fig4. Please enter server’s host name and workgroup for Windows
networking by SMB protocol. The default host name is DN-13005 and
workgroup is. If you want to use the file server function, you have to set the
same codepage as that your Windows PC is using.
4.
Assign IP address to DN-13005 as Fig5. Please choose the one method to
set the IP address of the server. You can automatically get IP by using DHCP
or manually assign an IP to the server.
⑧
.
Set Up Printers
You can set up your network printer using steps below.
7
