English
①
.
Introduction
This document describes the steps for installation and configuration of
DN-13005 USB MFP server as a Print/File/Scan server in Windows environment.
Refer to the User’s Manual in the bundled CD-ROM for more details.
-
This Setup Guide is only for Windows users.
-
If you use DN-13005 in Unix/Linux, please refer to the User’s Manual in the
bundled CD-ROM for more details.
②
.
Package Contents
If any item is missing, please contact the shop where you bought this product.
-
One DN-13005 USB MFP Server.
-
One DN-13005 MFP Control Center Software CD.
-
One DC IN 5V/2A Adaptor.
-
This Quick Installation Guide.
③
.
OS Requirements
1. Windows 98 SE/ME/2000/XP/2003
2. Unix, Linux , Apple OS X 10.3x and RFC-1179 LPD System
④
.
Physical Description
Please refer to Fig 1, Physical Description.
1.
Power Adaptor Connector:
DC IN 5 V/2A adaptor
2.
Init Button
: print the configuration page and initialize the server
3.
Ethernet Connector:
a twisted pair category 5 cable
4.
USB Host Ports:
USB 1.1/2.0 low, full and Hi-Speed compliant
5.
Indicators
Power Indicator
is lit while power is applied. If it is not lit, or if it blinks,
there is a problem with the MFP server or Power Adapter.
Link Status
is lit while network is applied. If it is not lit, it indicates that
the server does not connect the network.
Status Indicator
blinks to indicate network activity.
USB1 Indicator
is lit while an USB device connects to USB1 Port of the
MFP server. If it is not lit, or if it blinks, there is a problem with the USB
device or the MFP server.
USB2 Indicator
is lit while an USB device connects to USB2 Port of the
MFP server. If it is not lit, or if it blinks, there is a problem with the USB
6
