- 10 -
7. Power on the PC.
Note: It is not necessary to power down the whole system for install a new PC or KVM
thereafter. All you need is to make sure that the new PC or KVM is OFF during the
installation. If the KVM powers down due to external factors (such as power failure or the
power of the KVM is turned off), we recommend you to reinstall the whole system.
Note:
It is noteworthy that there are two levels available.
Expansion
1. PCs
It is not necessary to power down the KVM or other computer connected to the KVM system.
You only need to power off the desired PC and connect the PC to the CPU port of the KVM
in parallel by the 3-in-1 cable, and then power on the PC.
2. Slave KVM
Make sure the power switch at the rear panel of the KVM is OFF. Use the AC power cord
(3-in-1 cable) to connect the console port of the slave KVM to the CPU port of the master
KVM. Power on the slave KVM.
For example:
If you want to install one Slave KVM and three PCs, then just follow Step 2 of the foregoing method
to add the slave KVM and install the PCs one by one according to Step 1.
