- 16 -
5. After the update completes (which takes about 1.5 min), power off the KVM. Unplug the F/W
Update Cable. Power on the KVM again.
6. You can use the system setting “F1”- Information in the OSD to examine whether or not the
F/W version is the updated version.
TROUBLESHOOTING
Confirm whether or not the cable is good and connected properly
Q1 :
What should we do if the keyboard has no response?
A1a: Reboot the PC.
A1b: For Auto Scan Mode, press [Esc] to exit.
Q2 :
What should we do if the mouse has no respond?
A2a: Reboot the PC.
A2b: For Auto Scan Mode, press [Esc] to exit.
Q3 :
What should we do if the OSD cannot display normally?
A3a: If the KVM switch is a standalone, then power off the PC. Unplug the special cable of the
KVM switch and then power on the KVM switch. Connect the special cable of the KVM
switch and power on the PC.
A3b: If the KVM switch is connected in series, then power off the PC. Unplug the special cable
of the KVM switch. Power on the master KVM switch and then start the slave KVM
switch. Connect the special cable to the KVM switch and power on the PC.
Q4 :
What should we do if there is a video problem?
A4 :
The quality of cable is not good enough. Please use high-quality Smart View cables.
Trademarks:
All the companies, brand names, and product names referred to this manual are the trademarks or
registered trademarks belonging to their respective companies.