Digitus DC-11201-1, Руководство пользователя, Страница: 22 / 26

Page 22 of 26
IV. Operate the 2-port USB KVM Swtich
1. Manual Switch by push button
You can switch to the next available active USB host connection by
pushing the switch button on the 2-port USB KVM Switch
2. Hot Key Switch (PS/2 keyboard only, not available for USB keyboard)
[Scroll] , [Scroll], [1] or
[Scroll], [Scroll], [2]
You can switch between PC connections by using the following two-step
Hot Key sequence. To send commands to the USB KVM Swtich, press
the [Scroll] key twice (Step 1), then press key [1] or [2] (Step 2) to switch
between the two PCs. (If you press key [1] or [2] on the number pad, the
keyboard, mouse will not be switched.)
Note: When using the two-step Hot Key sequences, the keys must be
pressed within 3 seconds, otherwise the Hot Key action will be
canceled. After pressing the Scroll key twice, the Scroll LED will
start blinking and wait for the Step 2 hotkey, after pressing any
key or over 3 seconds, the keyboard LED will back to the original
status.
3. On-Screen-Display (OSD) Switch (Windows only)
Activate the OSD and click the port number on the OSD. The active host
will change to the indicated port.