Digitus DA-90387, Руководство пользователя, Страница: 14 / 14

Display
Readout Trouble
Description
Resolve
E01
Lifting speed of
two legs is not
able to lift at
same position.
please check all the wired connection
are secure , including legs to cable, and
cables to control box.
E04
desk Leg 1 was
overloaded
Make sure the loading capacity of desk
is less then 250lbs, and then reset the
desk.
E08
desk Leg 2 was
overloaded
Make sure the loading capacity of desk
is less then 250lbs, and then reset the
desk.
E10
Leg 1 has
collision and
rebounded
The desk will automatically stop and
bounce back 2 cm. Perform the reset
procedure outlined in the Digital
Memory. Controller section
E20
Leg 2 has
collision and
rebounded
The desk will automatically stop and
bounce back 2 cm. Perform the reset
procedure outlined in the Digital
Memory. Controller section.
HOT
MOTOR OVER
HEATED
Let the base cool down for 18 minutes.
For urgently using, try to re-plug to
re-start the system.
Remark: If your desk is not functioning properly, it may need to be
reset or restarted.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity
is part of the shipping content. If the Declaration of Conformity is missing, you
can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany