Digitus DA-90387, Руководство пользователя, Страница: 12 / 14

b. If the Position of desktop is not at the lowest height. Please
press the "
UP " and " DOWN " at the same time until the desk
reaches its lowest height, and the system will make a sound
of beep, reset is complete.
4. Storing a Position
You can use this function to adjust the desktop to a saved height
with 4 positions.
If you are switching on the control unit for the first time, all the
saved position are set to the lowest desktop height, to change to a
saved position proceed as follows:
a. Press the UP or DOWN key to adjust the desktop to the
desired height, the display will show the desktop height.
b. Press and hold the "M" Key for 3s until the numbers on the
display started flashing.
c. Press memory position Key 1 to save the desk position in
memory.
d. The display will read "P 1" the memory position number you
saved.
The other position may be stored in the same way.
The desk base can be adjusted by pressing and holding either the
UP or DOWN button until the desired height is reached.
To program up to four presets: Use the up/down buttons to find a
desired height, then press "M" followed by a number 1 - 4.
CAUTION:
Once a preset button is pushed, the desk will move to the
programmed height.