Digitus DA-70548, Руководство пользователя

Страница: 3 / 14

Function
：
 Complies with Gen2i/Gen2m of Serial ATA II Electrical Specification 2.6
 Supports SATA II Asynchronous Signal Recovery (Hot Plug) feature
 Supports SATA to SATA pass through
 Complies with USB 3.0 Specification, USB Mass Storage Class, Bulk-Only
Transport Specification:
 Supports USB Super-Speed/High-Speed/Full-Speed Operation
 Supports USB HID operation
 Supports USB2.0/USB3.0/eSATA power saving mode
 Supports Dual LUN for USB2.0/USB3.0
 One Touch Backup
 Easy to Install and Set-up
 Supports clone function
 Design for Win2000, WinXP, WinVista, Win7/8, MAC 9.2 or later version.
Clone:
 Please note the below conditions before clone:
 Bay ‘A’ = SOURCE HDD,
 Bay ’B’ = TARGET HDD
 TARGET HDD‘s capacity MUST be larger than SOURCE HDD, otherwise
the CLONE cannot be completed. (Same capacity is also not acceptable)
 Before CLONE function starts, make sure the information in TARGET HDD
is not important; once CLONE started, all information from the SOURCE
HDD will be covered into TARGET HDD
 Once the docking is connected to USB interface, the offline Clone will be
invalid. Clone can only process by using USB Clone Function.