Specification
:
–
Not need external power
–
CD Emissions and FCC regulations for Home/Office use
Hardware Installation
1. Plug the Mini-type connector into the upstream port;
2. Plug the A-type connector into a computer or USB hub downstream port;
3. Plug the memory card to each of the slot.
Important Note:
The CardReader must be connected to a USB 2.0-compliant host in order to function in high-speed
mode (480Mbps data rate). If the CardReader is connected to a USB 1.1-compliant host, it will operate
only in low-speed or full-speed mode (1.5Mbps/12Mbps).
Safety Instructions
Always read the safety instructions carefully
Keep this user’s manual for future reference
Keep this equipment away from humidity.
If any of the following situation arises, get the equipment checked by a service technician:
• The equipment has been exposed to moisture
• The equipment has been dropped and damaged
• The equipment has obvious sign of breakage
• The equipment has not working well or you cannot get it work according to this user’s manual.
© DIGITUS. All rights reserved.
Trademarks:
All the companies, brand names, and product names referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
electronic components distributor
