Digitus DA-10287, Руководство пользователя

Страница: 7 / 7

Reconnection in Event of Bluetooth Disconnection
If by any reason your device and the Speaker are disconnected, such as out of connection
distance or powering off, the Speaker will “auto-connect” with compatible devices that
auto-search and re-connect with their last connecting device, the reconnection time is 30
seconds, please don’t operate the speaker at that time.
If want to disconnect the Bluetooth speaker after succeed in paring, can long press
pause/play button.
Controlling Playback When Connected Via Bluetooth:
Volume: Using the volume controls on the side of the Speaker, press the ( + ) button to
increase volume and the ( - ) button to decrease volume.
Pause music: press the pause/play button to pause playback when the Bluetooth
connection. Press again to resume music.
Connecting to a Device Via 3.5 mm “LINE IN” Input
You can use DA-10287 Bluetooth Speaker for music playback with any device which has a
3.5 mm headphone port. Simply plug one end of the cable into your device, as you would
a pair of headphones. Plug the other end of the cable into the 3.5 mm port marked “LINE
IN” on the front of AONI-611BT Bluetooth Speaker, then Play music.
When Connected Via 3.5 mm “LINE IN” Input:
Note: Pause cannot be controlled with the pause/play control on DA-10287 Bluetooth
Speaker when connected via the 3.5 mm “LINE IN” input, the GRENN LED light will be
normally on. Use the pause control on your device as you normally would.
Recharging Battery
Plug the Mini USB end of the included USB cable into the mini USB port. Plug the other
end into a USB port on your computer or other devices made for USB charging. The LED
light will begin to RED . It will be GREEN at full charged. Charging time is 4 hours from an
empty battery, it’s better to charge 12 hours at the first three times.